Butterfly|Gate|Globe|Ball valve-China valve manufacturer and factory

PFA PTFE Lined gate valve manufacturer

PFA PTFE Lined gate valve manufacturerPFA PTFE Lined gate valve manufacturer
PFA PTFE Lined gate valve manufacturer

PFA PTFE Lined gate valve manufacturer Product introduction

 PFA PTFE Lining gate valve manufacturer, factory and supplier China. PFA PTFE Lined gate valve is mainly used for chemical industries, such as sulfuric acid, alkali etc. this gate valve in wedge type construction. Body material we can provide ASTM A216 WCB, or stainless steel CF8, CF8M etc. Liner material FEP, PFA, PTFE all produced by Dupont or Daikin.

PFA PTFE Lined gate valve  body inner surface is lined with fluorine plastic like FEP/PFA/PTFE or some other kinds of lined material. PFA PTFE Lined gate valve is commonly used in the power generation, brewing, water and food industries and suitable for both gaseous and liquid service. PFA PTFE Lined gate valve typically applied in chemical/petrochemical process, food and beverage, and pulp and paper etc.PFA PTFE Lined gate valve  features ease of maintenance, repeatable on-off, long life durability. PTFE lined butterfly valve is with bi-directional flow and since the valve port corresponds to the piping diameter, a high flow capacity is guaranteed.


PFA PTFE Lined gate valve specification:
Body Material Carbon steel WCB, stainless steel 304 316 or others
Disc Material Carbon steel WCB, stainless steel 304 316 or others
Liner PTFE/FEP/PFA
O-Ring Viton
Nominal Width DN50 – DN600
Operating Pressure PN10
Operating Temperature -20 – 150⁰C
Connection Flange
Operating Mode Manual, Pneumatic, Electric

PFA PTFE Lined gate valve material details:
Body, Bonnet & Wedge ASTM A 216 GR. WCB (Cast Carbon Steel)
ASTM A 351 GR. CF8 (SS 304)
ASTM A 351 GR. CF3 (SS 304L)
ASTM A 351 GR. CF8M (SS 316)
ASTM A 351 GR. CF3M (SS 316L)
Lining FEP (ASTM D 2116) - Fluorinated Ethylene Propylene
PFA (ASTM D 3307) – Perfluoroalkoxy Alkane
ETFE (ASTM D 3159) - Ethylene Tetrafluoroethylene
PTFE (ASTM D 4895 - Polytetrafluoroethylene
PVDF (ASTM D 3322) - Polyvinyldiene Fluoride
PP (ASTM D 4101) - Polypropylene
HDPE - High Density Poly Ethylene
Lining Thickness 3 To 5mm

PFA PTFE Lined gate valve manufacturer Related Products

Previous:FEP PFA PTFE Lining gate valve

Next:FEP PFA PTFE Lining globe valve


Shanghai Huixuan Valve&Pipe Co.,Ltd.   Address :No.720 Suide Road,Jiading district,Shanghai,China
English website :www.hxvalves.com       Tel:+86+17717520739   
 Email :info@shxvalve.com
  
Copyright © 2012  Shanghai Huixuan Valve&Pipe Co.,Ltd.

               BALL VALVE   PLUG VALVE  BUTTERFLY VALVE  CONTROL VALVE  JACKETED VALVE